Jump to content
Security Installer Community

Alarm Monitoring And Broadband


Recommended Posts

it sounds like then that they/whoever has wired the dialler so that it will disconnect all other devices when in use.

However it is impossble to filter dsl out at the dialler this way, because if you do it will filter the dsl signal at source so it wont be available.

Only way is to rewire it but this has other implications.

As i have said before the correct way is a dedicated line for the alarm

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

Link to comment
Share on other sites

  • 1 year later...

bear in mind that if you are going to fit a standard adsl filter, you need to know what wires to use in the filter.

at the moment, there is only one dedicated alarm adsl filter on the market for uk alarms, the rest are your run of the mill phone filters

older redcares used to be, until they brougfht out the modem compatability interface, and that also let you on to fax and card reader lines as well:)

Every day is a school day

Link to comment
Share on other sites

there is only one dedicated alarm adsl filter on the market for uk alarms, the rest are your run of the mill phone filters

which one is the alarm filter ?

prestec?

dualcom?

the dear one resold by act ?

Mr th2.jpg Veritas God

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.