Hi All,

I have a dedicated micros digital sprite dvr sl dx16C which im trying to connect to a normal monitor with vga connection. I have got the right convertors to get the cable from the monitor into the back of the dvr (using a 9pin to 15pin male then 15pin male to 15pin female which then takes the monitor cable!!). I cannot get a picture on the screen

What other configuration setting do I need to set to ensure I get a signal/picture?Is there a setting in the menu?

Also is there a cable that doesnt needs so many addons that can go straight from dvr to the monitor!!?

Thanks

Jig:)

The monitor output from the DM is via BNC only.

You will probably need a TV card with VIDEO IN usually i the form of a yellow phone socket.

If you want to use a vga monitor you have to get a converter to change it from bnc to vga and there about

If you want to use a vga monitor you have to get a converter to change it from bnc to vga and there about

I replaced one this week with the above problem and its less than a year old.

I think we may have had about 4 in total do this. I think two we sent back but if you get them places like LJD you are wasting your time! I've got two others that have just gone over their year guarentee but you cant expect the customer to pay. We've found if you find a DVR with a VGA output and buy a better known make flat screen monitor you can scrap the VGA converter box altogether.

Agreed we only fit DVRs with VGA output now

Seen as the bnc to vga convertor's are not great, what are good lcd panels that have bnc inputs? What is the picture quality like and best places to buy from??

We've found if you find a DVR with a VGA output and buy a better known make flat screen monitor you can scrap the VGA converter box altogether.

hi sparky83,

this guy could use and LCD Tv, phillips do a nice one and so do Sony but as usual dearer. LCD TV's tend to have a composite video input, the site will need a Tv Licence so not a solution for all situations.

to get an lcd monitor only (no tv) are very expensive, Norbain do a 17" about

Edited June 25, 200619 yr by Lurch