james.wilson
-
Posts
30,643 -
Joined
-
Last visited
-
Days Won
287
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by james.wilson
-
-
It should recharge within 24 hours.
Also needs to, to comply
-
The piezo side is quite high voltage id be cautious. Just get a new one
-
Of it's new firmware on apps it can be programmed to sync the clock to the cloud
-
I doubt it's the battery
As in causing your sounder issue
-
No probably a failing piezo.
Not replacing your main battery will lead to control panel failure
-
so even if you only have 1 keypad connected on line 1 addressed as 1 it still doesnt work. Have you also tried a temp small cable just out of the panel to prove the wiring?
-
It depends on what panel maybe upload a photo of it?
-
1000m is best possible case with nothing in the way. Bricks pipes foil plasterboard insulation all massively reduce this figure. Only way is to test
-
Yeah just get the unit only and it will clip in.
-
You also need to exit engineers for it to find the new keypad
-
1 hour ago, sixwheeledbeast said:
I don't think much has happened in printer tech within the last 4 years.
I've never rated Lexmark. I've still got my Brother colour laser and I still rate them, just like I've had good Kyocera lasers in the past.
A lot of people seem to be getting big colour photocopiers for work instead of printers. For inkjet refillable tank types are becoming more popular.
bought a 2nd hand monster one. Charities get rid every 3 yrs etc
Its been flawless and i use it to print the village newletter etc 88000 pages in the last 18 months just on that.
But ive tried to go as paperless as possible so print a lot less than we did 5 yrs ago. Not cos im green just for money reasons
-
1
-
-
kyocera here
-
id asssume then wired into the inputs.
-
the nice rf module would be plugged in here. As i should it isnt so im assuming your not use nice rf remotes
-
1
-
-
as i said above the nice rf module isnt fitted
also the nice aerial isnt wired in
-
as far as i can see the nice rf reciever isnt fitted. Is it the faac module?
Got a pic of a remote?
-
I think the powermaster is 2 way.
powermax was 1 way
3 hours ago, PeterJames said:It was expensive but it was always one way wireless tat. If you have defaulted the panel completely (and it sounds like you have) then the factory engineer code will work. You just need to reprogram it now.
but adt group own it now, may default to different. Dont know whouldnt touch it
-
Agreed you would for an optex or hkc sensor
-
-
No makes no difference. Sounds like a failed detector
-
If its only when fully zoomed out it's probably seeing the edge of the lens. Buy I larger format lens is another option
-
You using home assistant or shelly cloud?
-
Also assuming everything is 100%
-
You are Al
If new Co did as they should no problem. But if new Co isn't approved and or not insured the sites insurance will look to the firm that is.
Modern times of litigation you need to protect yourself or you will find you may have breached your own insurance terms.
door/window opening detectors with fixed tamper alarm on lightsys
in Control Panels (Public)
Posted
Or get better equipment