_2d2230.png)
_5a42ce.png)
sjsturner
Trade Full Member
-
Joined
-
Last visited
Everything posted by sjsturner
-
-
-
-
-
-
That’s true. i do get a lot of commercial that don’t want URN though just an ARC connection. some don’t think it’s necessary. some don’t trust the police to turn up. some like to use guarding firms. the apps and Smart Digis is a good opportunity for the small companies though like you said.
-
-
Your not being mocked Steve, the good wireless is very expensive and would cost more than the £400 you didn’t want to spend anyway, they are just as hard to set up and program. i would always use the wiring if given the option, providing it’s all okay of course
-
Out of interest 6, do any isp’s update their routers routinely BT for example, I have heard of issues with certain routers with this believed to be a possible culprit of connection problems
-
Lol, I like what you did there
-
At least it’s not “Eton Dave”
-
That’s right PJ rules are rules and Dave just got his “privilege checked”
-
QFA you're right on every point, bit slack if techs answer is banging on bell trig, with no mention of other issues. the number of blown contacts/outputs I’ve come across in the past have been feeding mag/strike locks to a simple handy relay in a panel.
-
I would fit back emf protection by way of a varistor or diode at the MB terminals if it were me, if not then there’s a strong chance of blowing your panel aux supply.
-
Not sure, I’ve done it using downloader. you sure the output is set up correctly with yourT/switch? used to love programming these, first time ever was a massive ball ache though
-
No. may I ask why no door contact?
-
Lol, no worries mate
-
I’ve never tried it mate to be honest, I doubt they would make it to the annnual service. the E/E a door cont? if so they are “always awake” anyway or should be. you may need to delete and then enroll and mesh if that’s the case. Does it walk test out ok?
-
You mean “always awake”? depletes battery life is the only problem. are you giving the PIR,s time after you set the system?
-
Yeah that sounds good.
-
It’s certainly a port forward issue, do you access to a diffrent router you could try? its not a HH3 is it?
-
-
-
My beef was with the IT guy not the router, but I did follow the defaulting instructions and had all the right lights flashing, it came up as the default router code, then changed to what it was originally programmed as, along with the password nobody knows!
-
