Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,476

  • Joined

  • Last visited

  • Days Won

    131

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Better of keeping the Bosch and getting a smaller lighter sds on the dewalt , I see Makita do a few versions of sds smaller ones look good for up ladders perhaps
  2. al-yeti
    Model? My 24v so heavy
  3. al-yeti
    You can buy spy glass cameras etc look in eBay stacks of stuff about
  4. al-yeti
    What's the texecom app do, is there a demo version?
  5. al-yeti
    Maybe your hkc installer has included the securcom in your monthly maintenance option I think hkc would overtake texecom in a big way if there app had a free version But like you said money isnt the issue
  6. al-yeti
    Lol
  7. al-yeti
    Just be sure to use speakers on speaker terminals and sounders on power outputs if that makes sense
  8. al-yeti
    Visonic programming stupid
  9. al-yeti
    Yes you can switch a relay taking power from another psu, what alarm panel is it?
  10. al-yeti
    Not that big
  11. al-yeti
    So if it's incorrect just follow suit?
  12. al-yeti
    Are they a subsidiary of vw?
  13. al-yeti
    Get better baluns
  14. al-yeti
    Most diallers factory set to negative trigger so connecting to your bell trigger will also work if you don't know how to programme the pgm output (unless it's the same on this panel)
  15. al-yeti
    Ez What he's possibly asking is if you u twisted all the pair's and got the legs mixed up, although I understand what you mean to Is the cat6 shielded? As on bench length would short , others here have mentioned about this
  16. al-yeti
    Pyronix as well? Well then who else will be next means third party like webway have more difficulties ahead? Or not really
  17. al-yeti
    Lol yeah not my business model but scanny on pins no?
  18. al-yeti
    Lol thanks my English + android gets the better of me +rodent(1)
  19. al-yeti
    Come on don't be sensitive
  20. al-yeti
    Good time to get rid of all together admit it doc
  21. al-yeti
    Soldering won't do Jack unless you didn't loop them correctly at PIR end first time
  22. al-yeti
    I think now it's time for a hole cutter chop up the floor and find the fault
  23. al-yeti
    What's the point he's got a cable fault
  24. al-yeti
    Is there a room above pir you can lift carpet and floor board and have a look
  25. al-yeti
    Yeah you can try that , either way if not prepared to pay an engineer then you have to try yourself (don't loop the power obviously)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept