4 hours ago, al-yeti said:

James is pointing out that your connecting to a relay which unless wired correctly will do nothing 

 

Assuming the relay is triggered on alarm the no can stay in the bell trigger , but the c (common needs to connect to negative or minus or -ve ) that way when the alarm triggers it will connect the bell trigger to the negative it requires to ring it

 

 

 

 

Strobe I am not sure , the other outputs are programmable perhaps and you need to look at menus what they can do

Agreed can you post a pic of the panel wiring

4 hours ago, al-yeti said:

Actually opto relays , I couldn't be bothered to see what and how they work in the panel other than that optical relays work similar 

Opto relay is electrically isolated can't see the point on board tho unless it's known the board has shit loads of noise on it

10 hours ago, james.wilson said:

Agreed can you post a pic of the panel wiring

 

Hi thanks for getting back to me I will send picture of panel and wiring when I get home thankyou

 

Kind regards

Naeem

3 hours ago, Naeem ahmed said:

Hi thanks for getting back to me I will send picture of panel and wiring when I get home thankyou

 

Kind regards

Naeem

Hi here is a pic of the panel wiring

Hi here is a picture of panel wiring bell trigger is in white and yellow is strobe

 

 

 

yuo may need a resistor between bell trigger and ho+ something about 10k

Hi thanks for getting back ok will give it a try but what is ho+ please

On 10/05/2023 at 17:30, Naeem ahmed said:

Hi thanks for getting back ok will give it a try but what is ho+ please

Hold off positive

Hi thanks sorry for getting back late the bell is working now but I can't get the strobe to work when I do a test between the negative and strobe it works but it doesn't work when alarm is ringing I got it in ou2 and program it in outputs but still nojoy

 

 

 

 

 

must be output problem either blown output or programmed wrong