Evening all,

 

I'm installing a Euro 46 V10 panel for a friend, along with the DIGI-LAN communicator for app capability. I've fitted a few of these Pyronix (and previously Castle) panels before, but I'm a bit stumped with the conflicting instructions that came with communicator and the panel. Below is the an excerpt from the DIGI-LAN installation manual:

As you can see it suggests to use the included power cable to get power from the Aux 12v terminal. (Assuming Euro 46 App and V10 are the same thing in this case.)

Below is an excerpt from the 'communications guide' that came with the Euro 46 V10:

Now it's telling me not to hook up the power input...

When I fitted one of the older 2016 Euro 46 App panels (before they came out with the V10), I used the power cable with the DIGI-LAN and it worked fine. Can I assume it is safe to use the power cable with the DIGI-LAN and Euro 46 V10? I'd rather be certain that chance it.

The one downside of buying Pyronix is that I cannot ask them myself, but I am hoping one of you may know the answer.....

 

Thanks in advance,

 

Saaj

I don't see an issue assuming it's  12v input. Don't use it any more but the old castle stuff was solid

I did a pair of 46 on app about 2 yrs ago, I think I used the black & red lead like the instructions state,

 

I'm surprised they've  never done a plaggy endstation with wifi & a radio zem.

Ending up using the 12v cable as suggested and all is fine, nothing has gone pop!

 

Thanks,

Saaj