MarkPed Posted July 1, 2021 Share Posted July 1, 2021 An aged system with eight detectors. Engineer walk-tests fine. But alarm is not tripped by any of the detectors except the three set as exit roots. Really puzzling thing is that if I trip a non-exit detector first (no alarm showing), then an exit detector, the formers number appears on the key pad. Any thoughts on a simple mistake in set up? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44645-fault-on-an-aged-scantronic-9000-system/ Share on other sites More sharing options...
sixwheeledbeast Posted July 1, 2021 Share Posted July 1, 2021 Sound like bell delay setup for signalling. Something this age I would want to recommend upgrade for reliability really. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44645-fault-on-an-aged-scantronic-9000-system/#findComment-511455 Share on other sites More sharing options...
MarkPed Posted July 1, 2021 Author Share Posted July 1, 2021 Bell delay set to zero; Exit time to 10 seconds. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44645-fault-on-an-aged-scantronic-9000-system/#findComment-511456 Share on other sites More sharing options...
MrHappy Posted July 1, 2021 Share Posted July 1, 2021 3 hours ago, MarkPed said: An aged system with eight detectors. Engineer walk-tests fine. But alarm is not tripped by any of the detectors except the three set as exit roots. Really puzzling thing is that if I trip a non-exit detector first (no alarm showing), then an exit detector, the formers number appears on the key pad. Any thoughts on a simple mistake in set up? Its pile of old tat which wants ripping out & replacing The zones which don't work may not be in the area which is set IIRC the panels software scans the zones from high to low, under certain circumstances movement in an unset zone will trigger an alarm. They all do odd thing like the entry tone or alarm tone will continue when unset/ silenced, entering a walk test will stop it Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44645-fault-on-an-aged-scantronic-9000-system/#findComment-511458 Share on other sites More sharing options...
MarkPed Posted July 1, 2021 Author Share Posted July 1, 2021 New it is then!! Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44645-fault-on-an-aged-scantronic-9000-system/#findComment-511459 Share on other sites More sharing options...
MrHappy Posted July 1, 2021 Share Posted July 1, 2021 1 hour ago, MarkPed said: New it is then!! you flash git.... fancy throwing out a 25yr old + alarm panel Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44645-fault-on-an-aged-scantronic-9000-system/#findComment-511460 Share on other sites More sharing options...
james.wilson Posted July 1, 2021 Share Posted July 1, 2021 Boiler control next but that's brobably already done securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44645-fault-on-an-aged-scantronic-9000-system/#findComment-511462 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now