Hi

Javing issue resetting after changing batteries in 2 wireless shock detectors (Risco units). Tamper reset is set to any code for sure, in fact all resets are set to any code. I have tried turning both unis off and then adding them back but the alarm will not reset.

 

To reset I am entering main code, saying yes to set but all to no avail. I have checked the tamper springs etc in the sensors etc but the thing just does not want to reset

 

If I remove all power (including backup battery) will this force a reset (I am guessing so)

 

Any other ideas anyone?

1 hour ago, paulbaker1954 said:

Hi

Javing issue resetting after changing batteries in 2 wireless shock detectors (Risco units). Tamper reset is set to any code for sure, in fact all resets are set to any code. I have tried turning both unis off and then adding them back but the alarm will not reset.

 

To reset I am entering main code, saying yes to set but all to no avail. I have checked the tamper springs etc in the sensors etc but the thing just does not want to reset

 

If I remove all power (including backup battery) will this force a reset (I am guessing so)

 

Any other ideas anyone?

Javed of all trades best leave it alone 

Risco being Risco? You could try a power cycle if you have the confidence to reprogram everything if it does wrong.

Best option would be to get someone that knows Risco to sort it out.

 

2 hours ago, paulbaker1954 said:

Hi

Javing issue resetting after changing batteries in 2 wireless shock detectors (Risco units). Tamper reset is set to any code for sure, in fact all resets are set to any code. I have tried turning both unis off and then adding them back but the alarm will not reset.

 

To reset I am entering main code, saying yes to set but all to no avail. I have checked the tamper springs etc in the sensors etc but the thing just does not want to reset

 

If I remove all power (including backup battery) will this force a reset (I am guessing so)

 

Any other ideas anyone?

Seriously tho, these are a proper pain , all the risco stuff is on resetting tampers , annoying 

 

But you sure all batteries are good ? And you closed them correctly ?

 

Last one I found was a sensor the customer didn't know they had (smoke alarm) 

4 hours ago, paulbaker1954 said:

Any other ideas anyone?

 

rip it out & stamp on it?

 

its 1 way radio, wait for the device to sleep then wake the transmitter with a 12hr alarm or view the device strengh

1 hour ago, MrHappy said:

 

rip it out & stamp on it?

 

its 1 way radio, wait for the device to sleep then wake the transmitter with a 12hr alarm or view the device strengh

Weird

 

left for 24 hours and then all reset ok. Have to say pain in the ass but all ok now

29 minutes ago, paulbaker1954 said:

Weird

 

that's the way they work....

1 way all jammed up pretty normal as above

29 minutes ago, Logan said:

Smash the keypad and panel and Put it in the bin   then get a decent panel with 2 way comms

 

yeah!

6 hours ago, Logan said:

We all hate risco lol    thats why i call it s**tsco

Blag