SW-1070 External Bell Not Sounding

[james.wilson]

There is a 2nd entry timer 

[al-yeti]

8 minutes ago, james.wilson said:

There is a 2nd entry timer 

You think changed split?

[james.wilson]

Isn't the default 30 seconds, but I've never had corruption on a hkc either

[al-yeti]

1 minute ago, james.wilson said:

Isn't the default 30 seconds, but I've never had corruption on a hkc either

Split entry is zero default , entry is 30 , perhaps he's put 30 also into split by mistake

[Eugene's DIY Den]

5 minutes ago, james.wilson said:

Isn't the default 30 seconds, but I've never had corruption on a hkc either

I thought reentering the value of 0 for the bell delay had made a difference but I double checked and it hadn't so I don't think there is corruption.

[Eugene's DIY Den]

7 minutes ago, al-yeti said:

Split entry is zero default , entry is 30 , perhaps he's put 30 also into split by mistake

On my system startup diagram,  split entry is 30 by default. I changed it to 0. I'll check later today if this rectified the problem.

[al-yeti]

25 minutes ago, Eugene's DIY Den said:

I thought reentering the value of 0 for the bell delay had made a difference but I double checked and it hadn't so I don't think there is corruption.

He's talking about entry, we moved on from bell delay

 

 

[Eugene's DIY Den]

Ok, so setting spit entry time to zero solved the problem. Now there's no delay between internal sounder and external bell activating when the entry door is opened and code isn't entered before the entry delay times out. However I still have an issue with alarmed internal doors and PIRs not activating the alarm if the entry door is opened first and these sensors are activated before the entry delay times out. So for example I open an external door,  panel starts beeping, I don't enter the code and I open an alarmed internal door. The internal sounder activates, but not the outside bell. (didn't check if there's a delay before it actually does)

Are these zones walk through by default?

Edited March 1, 2020 by Eugene's DIY Den

[al-yeti]

1 hour ago, james.wilson said:

There is a 2nd entry timer 

Well spotted

[james.wilson]

11 minutes ago, Eugene's DIY Den said:

Are these zones walk through by default?

Not by default depends how its programmed