TEXECOM INSTALLED abroad -just need Guidance

[MD Dan]

Hi All

i Just finished installing Alarm. installed one in my UK house hence wanting to use again

I'm looking for someone (and i don't expect it for free) to take a look at my Wintex back up and tell me where i've gone wrong. (probably something silly) if you wish i'm happy to use team view.

I have a Texecom Elite 88 with 3 expanders at the moment 3 key pads in house (Prox type) but will be increasing to 5 when they arrive .

(To be added- garage & outbuilding ) just waiting for them to arrive

There are 29 zones ,PIR's & contacts.

All zones show secure

All doors chime, but i cant get alarm to set

i would like a day night Part arm set also but not set up this bit yet.

I'm not in UK so getting help here is zero

I brought all equipment with me from UK

Pics of install available too

 

cheers

 

 

 

[sixwheeledbeast]

I hope you have PSU's on the system too and it's not all running off the panel.

If all the zones are closed i see no reason why the system shouldn't set.

Parts set are pretty straight forward you need to get the system arming first.

 

[datadiffusion]

22 hours ago, MD Dan said:

Hi All

i Just finished installing Alarm. installed one in my UK house hence wanting to use again

I'm looking for someone (and i don't expect it for free) to take a look at my Wintex back up and tell me where i've gone wrong. (probably something silly) if you wish i'm happy to use team view.

I have a Texecom Elite 88 with 3 expanders at the moment 3 key pads in house (Prox type) but will be increasing to 5 when they arrive .

(To be added- garage & outbuilding ) just waiting for them to arrive

There are 29 zones ,PIR's & contacts.

All zones show secure

All doors chime, but i cant get alarm to set

i would like a day night Part arm set also but not set up this bit yet.

I'm not in UK so getting help here is zero

I brought all equipment with me from UK

Pics of install available too

 

 

All wired, no wireless detectors?

[Nova-Security]

39 minutes ago, sixwheeledbeast said:

If all the zones are closed i see no reason why the system shouldn't set.

 

No exit time or zone programmed as final not timed.

[sixwheeledbeast]

Well yes i suppose I took it as not starting the exit timer at all. The OP needs to expand to help any further.

[datadiffusion]

It sounds wired but I wasn't sure if it was perhaps wireless and unable to communicate with detectors prior to setting. However, I guess  it would have plainly said that on the RKP...

[sixwheeledbeast]

59 minutes ago, datadiffusion said:

It sounds wired but I wasn't sure if it was perhaps wireless and unable to communicate with detectors prior to setting. However, I guess  it would have plainly said that on the RKP...

If the mesh is borked you can get a loading/waiting animation indefinitely.