5 hours ago, al-yeti said:

As Mr galaxy said

 

Sorry guys im still confused.... Can you draw it in crayon, as clearly that's my level! 

6 minutes ago, RevolvingSteve said:

 

Sorry guys im still confused.... Can you draw it in crayon, as clearly that's my level! 

Look at your picture 

 

Right hand vertical board at top there is a switch , next to it is a jumper with two small pins , use the jumper to short both pins this will close the tamper

 

If the card was in its own box it would have a spring on the switch instead 

You mean this:

 

Edited January 21, 20197 yr by RevolvingSteve

49 minutes ago, RevolvingSteve said:

You mean this:

 

Yes

22 minutes ago, al-yeti said:

Yes

 

Roger! Ill check it in the morning and report back!

11 minutes ago, RevolvingSteve said:

 

Roger! Ill check it in the morning and report back!

Now? Lol

Just now, al-yeti said:

Now? Lol

 

I cant, its at the new house, Im not there again until tomorrow 

Problem solved, fitted the jumper and all fine. Once again, thanks for the help!

On 19/01/2019 at 15:09, al-yeti said:

So buy an expander as you have a 20 zone panel I thought

 

OK, C072 RIO fitted next to the main panel.

 

 

 

 Couple of questions:

1) Zone wiring is different, no 12v on the Zone terminals ( 1, 0v, 2, 3, 0v, 4 etc), I presume the 12v is connected to one of the 12v outputs on the opposite side of the expansion modules?

2) I can't find a wiring diagram for connecting the RIO to the main panel - Looking at it it looks like the B & A terminals on the RIO, but not sure the other end

 

 

29 minutes ago, RevolvingSteve said:

 

OK, C072 RIO fitted next to the main panel.

 

 

 

 Couple of questions:

1) Zone wiring is different, no 12v on the Zone terminals ( 1, 0v, 2, 3, 0v, 4 etc), I presume the 12v is connected to one of the 12v outputs on the opposite side of the expansion modules?

2) I can't find a wiring diagram for connecting the RIO to the main panel - Looking at it it looks like the B & A terminals on the RIO, but not sure the other end

 

 

Why you keep the cable stripped so short? Strip back more will be easier for you to manage

 

Also generally yes , a&b correct , I haven't really used the flex but the Rio could be powered with  single keypad and you could take an aux 12v from panel if it has one to Rio 

 

Few ways you can do it can't see pics that well