RevolvingSteve Posted January 21, 2019 Author Share Posted January 21, 2019 5 hours ago, al-yeti said: As Mr galaxy said Sorry guys im still confused.... Can you draw it in crayon, as clearly that's my level! Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482233 Share on other sites More sharing options...
al-yeti Posted January 21, 2019 Share Posted January 21, 2019 6 minutes ago, RevolvingSteve said: Sorry guys im still confused.... Can you draw it in crayon, as clearly that's my level! Look at your picture Right hand vertical board at top there is a switch , next to it is a jumper with two small pins , use the jumper to short both pins this will close the tamper If the card was in its own box it would have a spring on the switch instead Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482235 Share on other sites More sharing options...
RevolvingSteve Posted January 21, 2019 Author Share Posted January 21, 2019 (edited) You mean this: Edited January 21, 2019 by RevolvingSteve Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482240 Share on other sites More sharing options...
al-yeti Posted January 21, 2019 Share Posted January 21, 2019 49 minutes ago, RevolvingSteve said: You mean this: Yes Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482242 Share on other sites More sharing options...
RevolvingSteve Posted January 21, 2019 Author Share Posted January 21, 2019 22 minutes ago, al-yeti said: Yes Roger! Ill check it in the morning and report back! Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482245 Share on other sites More sharing options...
al-yeti Posted January 21, 2019 Share Posted January 21, 2019 11 minutes ago, RevolvingSteve said: Roger! Ill check it in the morning and report back! Now? Lol Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482247 Share on other sites More sharing options...
RevolvingSteve Posted January 21, 2019 Author Share Posted January 21, 2019 Just now, al-yeti said: Now? Lol I cant, its at the new house, Im not there again until tomorrow Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482248 Share on other sites More sharing options...
RevolvingSteve Posted January 24, 2019 Author Share Posted January 24, 2019 Problem solved, fitted the jumper and all fine. Once again, thanks for the help! Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482302 Share on other sites More sharing options...
RevolvingSteve Posted January 30, 2019 Author Share Posted January 30, 2019 On 19/01/2019 at 15:09, al-yeti said: So buy an expander as you have a 20 zone panel I thought OK, C072 RIO fitted next to the main panel. Couple of questions: 1) Zone wiring is different, no 12v on the Zone terminals ( 1, 0v, 2, 3, 0v, 4 etc), I presume the 12v is connected to one of the 12v outputs on the opposite side of the expansion modules? 2) I can't find a wiring diagram for connecting the RIO to the main panel - Looking at it it looks like the B & A terminals on the RIO, but not sure the other end Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482444 Share on other sites More sharing options...
al-yeti Posted January 30, 2019 Share Posted January 30, 2019 29 minutes ago, RevolvingSteve said: OK, C072 RIO fitted next to the main panel. Couple of questions: 1) Zone wiring is different, no 12v on the Zone terminals ( 1, 0v, 2, 3, 0v, 4 etc), I presume the 12v is connected to one of the 12v outputs on the opposite side of the expansion modules? 2) I can't find a wiring diagram for connecting the RIO to the main panel - Looking at it it looks like the B & A terminals on the RIO, but not sure the other end Why you keep the cable stripped so short? Strip back more will be easier for you to manage Also generally yes , a&b correct , I haven't really used the flex but the Rio could be powered with single keypad and you could take an aux 12v from panel if it has one to Rio Few ways you can do it can't see pics that well Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42621-honeywell-galaxy-flex-20-configuration/page/4/#findComment-482446 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now