Thanks for the help, you are correct.  I now have everything up and running, I just have to figure out how to programme the various modes I need.

1 hour ago, PyronixTexecom guy said:

Thanks for the help, you are correct.  I now have everything up and running, I just have to figure out how to programme the various modes I need.

You will need texecom crew for that , especially areas and all that part set stuff 

 

Think swb is around here somewhere fire some questions in lol

My old alarm I had two settings.

 

I'd press "set" and "A" when leaving the house, that way, on entering the property the front door contact sensor and front hallway PIR would give me 15 seconds or so to turn the alarm off.  Entering the house in any other way would trigger the bell.

 

The other setting was for sleeping.  Press "set" and "B", trigger any sensor other than the hallway PIR (which overlooked the keypad) and the bell would sound.

 

I just want to do something the same.  I know what zones are and have programmed them accordingly, but I don't understand what "areas" are yet and have no idea how to set that up.  Right now, the alarm is working for when I leave the house.

Oh and I don't know how to get the "quick arm" buttons working, I've looked everywhere and I can't find how to activate it.

8 minutes ago, PyronixTexecom guy said:

Oh and I don't know how to get the "quick arm" buttons working, I've looked everywhere and I can't find how to activate it.

Swb , texe helpers where rrrrrrrrrr uuuuuuuuuuu

So you need only one Area and one Part Set within that Area.

Hall will be Access Zone Type.

Quick Arm is in keypad Options and you press Area.

Right thanks, I found the quick arm option.

On 29/11/2018 at 23:24, PyronixTexecom guy said:

Oh and I don't know how to get the "quick arm" buttons working, I've looked everywhere and I can't find how to activate it.

It's one of the attributes in keypad setup. Number 6 I think of all the stars.