Xilant Security Posted July 23, 2018 Share Posted July 23, 2018 Anyone else found the new ProSYS Plus software to be flaky, badly designed and laid out to make it as complicated as possible to program without a laptop? The BUS system in particular is really bad, personally I have only second fixed and commissioned these systems. System 1 was cabled in CAT5e (apparently recommended by Risco tech)? had to double up power cores to get voltage above 10v at the keypad. System 2 was cabled in alarm cable and I had to double up on the power cores again and run two separate data lines within the same cable splitting the detectors up from the keypads … it was the last resort and only thing that worked. however, 3 keypads on the system but only 2 show up. if 3 show up then nothing works. Metered the cable, fine, cable length less than 50m (estimated as I did not first fix) appears to be no interference. Every time I did a BUS device re-learn it changed what it saw for the keypads. conclusion.. bad cable or bad software. personally I think flaky software, would love to hear your thoughts/experiences. Paul Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/ Share on other sites More sharing options...
al-yeti Posted July 23, 2018 Share Posted July 23, 2018 22 minutes ago, Xilant Security said: Anyone else found the new ProSYS Plus software to be flaky, badly designed and laid out to make it as complicated as possible to program without a laptop? The BUS system in particular is really bad, personally I have only second fixed and commissioned these systems. System 1 was cabled in CAT5e (apparently recommended by Risco tech)? had to double up power cores to get voltage above 10v at the keypad. System 2 was cabled in alarm cable and I had to double up on the power cores again and run two separate data lines within the same cable splitting the detectors up from the keypads … it was the last resort and only thing that worked. however, 3 keypads on the system but only 2 show up. if 3 show up then nothing works. Metered the cable, fine, cable length less than 50m (estimated as I did not first fix) appears to be no interference. Every time I did a BUS device re-learn it changed what it saw for the keypads. conclusion.. bad cable or bad software. personally I think flaky software, would love to hear your thoughts/experiences. Paul You have the software? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477968 Share on other sites More sharing options...
Xilant Security Posted July 23, 2018 Author Share Posted July 23, 2018 Dial up configuration software ... yes Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477970 Share on other sites More sharing options...
MrHappy Posted July 23, 2018 Share Posted July 23, 2018 32 minutes ago, Xilant Security said: Anyone else found the new ProSYS Plus software to be flaky, badly designed and laid out to make it as complicated as possible to program without a laptop? risco tat... Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477971 Share on other sites More sharing options...
al-yeti Posted July 23, 2018 Share Posted July 23, 2018 31 minutes ago, Xilant Security said: Dial up configuration software ... yes Via laptop? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477972 Share on other sites More sharing options...
sixwheeledbeast Posted July 23, 2018 Share Posted July 23, 2018 1 hour ago, MrHappy said: risco tat... Ding! Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477974 Share on other sites More sharing options...
Xilant Security Posted July 23, 2018 Author Share Posted July 23, 2018 Yes via laptop , remotely and direct link Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477975 Share on other sites More sharing options...
al-yeti Posted July 23, 2018 Share Posted July 23, 2018 5 hours ago, Xilant Security said: Yes via laptop , remotely and direct link Ok so what's issue then? Only hard for those who don't have all that That leaves you with flakey software , personally I only offer to rip it out , is this your usual meaning risky ?or risco whatever you call it Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477981 Share on other sites More sharing options...
Xilant Security Posted July 23, 2018 Author Share Posted July 23, 2018 Flakey software ... I usually use Orisec these days, it’s great stuff. Only play with Risco when I sub to others that use it.. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477986 Share on other sites More sharing options...
al-yeti Posted July 23, 2018 Share Posted July 23, 2018 40 minutes ago, Xilant Security said: Flakey software ... I usually use Orisec these days, it’s great stuff. Only play with Risco when I sub to others that use it.. Orisec getting better yeah? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42269-risco-prosys-plus/#findComment-477988 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now