forumflyer Posted May 31, 2018 Share Posted May 31, 2018 Hi, I have wired in a roller shutter door to one of the relays on the net2 unit and on the programme set it to toggle. It will open the door but wont close it. The roller door unit is set right. Maybe it shouldnt toggle? or i have put the wires from the door in the wrong way. Ideas appreciated Quote Link to comment Share on other sites More sharing options...
james.wilson Posted May 31, 2018 Share Posted May 31, 2018 is the shutter an auto close one? I would also say it shouldnt be toggle as it will stay active until a valid card is presented or rte is pressed Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted May 31, 2018 Share Posted May 31, 2018 I imagine it will require a pulsed input with a timed closure and hopefully trap protection is up to spec... Quote Link to comment Share on other sites More sharing options...
forumflyer Posted May 31, 2018 Author Share Posted May 31, 2018 (edited) It has a laser break for safety installed. The problem we keep having is that its set on timer down but the moment the time lapses it starts to raise again?? Edited May 31, 2018 by forumflyer Quote Link to comment Share on other sites More sharing options...
james.wilson Posted May 31, 2018 Share Posted May 31, 2018 3 hours ago, forumflyer said: It has a laser break for safety installed. The problem we keep having is that its set on timer down but the moment the time lapses it starts to raise again?? id assume then it wants a pulse to open? then time out and reclose? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted June 1, 2018 Share Posted June 1, 2018 On 31/05/2018 at 18:27, forumflyer said: It has a laser break for safety installed. The problem we keep having is that its set on timer down but the moment the time lapses it starts to raise again?? How have you interfaced the two , diagram? I just interested on the roller control side , meaning how did you wire it? Onto the shutter switch? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.