Hi,

For the last 3/4 weeks the power light on my accenta control panel is flashing. The alarm and PIR's have been operating fine except that the alarm beeping tones are slower and lower pitched, and the control panel buttons take a lot of pressing. The main big alarm box  has a constant red light on it which I assume is the norm, however the outside bell box is not flashing.

Any ideas on what to do would be most appreciated.

Many thanks

Colin

 

Edited October 8, 20178 yr by sixwheeledbeast

Hi,

when was it last serviced and had a new battery installed?

Not sure why this topic was 'reported' but here is the answer;

 

Hi,

For the last 3/4 weeks the power light on my accenta control panel is flashing. The alarm and PIR's have been operating fine except that the alarm beeping tones are slower and lower pitched, and the control panel buttons take a lot of pressing. The main big alarm box  has a constant red light on it which I assume is the norm, however the outside bell box is not flashing.

Any ideas on what to do would be most appreciated.

Many thanks

Colin

 

For info ,I posted this question last week but unfortunately it was closed without reason. 

Many thanks for any assistance.

Colin

The thread wasn't closed, looks like it was reported for some reason. I'll merge them back as I am not sure if the questions about the battery where answered.

The original poster logged in as a guest and 'reported' his own topic, using the original text as the report, IIRC!

 

Nothing has ever been closed.

Edited October 8, 20178 yr by datadiffusion

Maybe its because nobody replied the op thought it was closed?

Many thanks for the update, hopefully someone will be able to assist with the control panel issue.

Thanks again

Colin

when was it last fully serviced?

The alarm system has not been serviced, I replaced the battery last year and that is the only maintenance I have done.

 

Thanks

Colin