mango Posted March 17, 2017 Share Posted March 17, 2017 Hi has anybody taken over one of these it also has a door entry system on it. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/ Share on other sites More sharing options...
Lwillis Posted March 18, 2017 Share Posted March 18, 2017 Yea take over a few over the years. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460503 Share on other sites More sharing options...
PeterJames Posted March 19, 2017 Share Posted March 19, 2017 Guardall panel no longer made, I have installed them in the past didnt like them that much then, I wouldnt want to take one on now. We look after group of leisure centres and two of the bigger sites have Chubb looking after the intruder, every year the customer asks us to take them over, and I keep giving them a price to replace the panel, it never gets any cheaper and Chubb keep the contract. 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460565 Share on other sites More sharing options...
mango Posted March 20, 2017 Author Share Posted March 20, 2017 On 3/18/2017 at 7:09 AM, Lwillis said: Yea take over a few over the years. Thank's for the reply do you know of any problems defaulting these 17 hours ago, PeterJames said: Guardall panel no longer made, I have installed them in the past didnt like them that much then, I wouldnt want to take one on now. We look after group of leisure centres and two of the bigger sites have Chubb looking after the intruder, every year the customer asks us to take them over, and I keep giving them a price to replace the panel, it never gets any cheaper and Chubb keep the contract. Sound's like a no no for me then thank's for the reply Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460680 Share on other sites More sharing options...
PeterJames Posted March 20, 2017 Share Posted March 20, 2017 53 minutes ago, mango said: Thank's for the reply do you know of any problems defaulting these Sound's like a no no for me then thank's for the reply As I remember they were a bit a of bugger to program two phone menus one for the built in digi the other was for dialer and both very similar I often made the mistake of being in the wrong one Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460681 Share on other sites More sharing options...
Jim Randle Posted March 20, 2017 Share Posted March 20, 2017 If it's a Chubb panel it will have a rolling engineer code. You will need an AVRISP2 In-system programmer and the UK firmware from Guardall to change the firmware from Chubb. A lot of pain really. I maintain about 100 of them. Jim Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460682 Share on other sites More sharing options...
datadiffusion Posted March 20, 2017 Share Posted March 20, 2017 In a nutshell sounds like not worth it for a single panel So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460683 Share on other sites More sharing options...
Jim Randle Posted March 20, 2017 Share Posted March 20, 2017 Guardall use EOL 8K2 in parallel. I've changed a few out to Texecom Elite panels and left the EOL's as Guardall values. If you program the panel zones to 4K7/4K7, it works fine. Jim 1 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460687 Share on other sites More sharing options...
Lwillis Posted March 20, 2017 Share Posted March 20, 2017 Not worth taking it over if it's one or two systems with those in and even then you'll need to flash it. better off swapping it out. The speaker outputs on them go sometimes -goes into full alarm even when unset without warning. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460711 Share on other sites More sharing options...
Nova-Security Posted March 20, 2017 Share Posted March 20, 2017 7 hours ago, Jim Randle said: Guardall use EOL 8K2 in parallel. I've changed a few out to Texecom Elite panels and left the EOL's as Guardall values. If you program the panel zones to 4K7/4K7, it works fine. Jim Didnt know that www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41073-chubb-px-500/#findComment-460734 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now