Samz90 Posted January 25, 2017 Share Posted January 25, 2017 Hello, Just after some advice about changing an old bell box for a Pyromix DeltaBELL plus. The panel is a Optima XM panel (quite old) I am unsure of how many cores are going to the old bell as I am doing the job for a friend. I am an industrial electrician by trade so I have limited knowledge of alarms! I have no manual for the new bell box but I am told there's 7 terminals. I'm due to go there this weekend so thought I'd do some homework before attempting it. Anyone on here have a diagram for this bell or any advice? I have the manual for the panel but not the new box. Thank You! Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted January 25, 2017 Share Posted January 25, 2017 Sorry we can't share manuals here. I imagine it will be 5 wires, the other terminals may be for extra features. Either way if 8 core, wire them all up and you can do whatever testing at the controls without being up and down the ladders. Quote Link to comment Share on other sites More sharing options...
Hillbilly Posted January 27, 2017 Share Posted January 27, 2017 Panel ov A to ov bell boxPanel 12v+D to 12v+bell boxPanel trigger B to bell ,bell boxPanel tamper return T to T bell boxPanel strobe -ov to St bell boxPut wire link from ov in bell box to the other T terminal 1 Quote Link to comment Share on other sites More sharing options...
al-yeti Posted January 27, 2017 Share Posted January 27, 2017 1 hour ago, Hillbilly said: Panel ov A to ov bell boxPanel 12v+D to 12v+bell boxPanel trigger B to bell ,bell boxPanel tamper return T to T bell boxPanel strobe -ov to St bell boxPut wire link from ov in bell box to the other T terminal If you don't have enough cores for strobe and bell , use bell output only and loop over to the strobe input at bell so both activate on alarm Quote Link to comment Share on other sites More sharing options...
petrolhead Posted January 30, 2017 Share Posted January 30, 2017 If you haven't bought it yet i would get the x not the plus. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted January 30, 2017 Share Posted January 30, 2017 56 minutes ago, petrolhead said: If you haven't bought it yet i would get the x not the plus. Or offer it as an upgrade next time as module is straight swap and buy the lamp Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.