Jump to content
Security Installer Community

Csl Dualcom Digiair Gprs


datadiffusion

Recommended Posts

You can have it on dialcapture with SIA and use the pins for fire etc

 

Yes, I saw that. Although, it says to call them before you do it, but do you really need to?

You may be interested to know the digiair will fit in the spacer for the Enforcer. See attached. You have to strip it out of its little red box, but it works a treat.

Just thought you would like to know.

 

Would a UDL version be of benefit to the Enforcer, i.e. does it support it?

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

You may be interested to know the digiair will fit in the spacer for the Enforcer. See attached. You have to strip it out of its little red box, but it works a treat.

Just thought you would like to know.

Ideal ! :) we've recntly started fitting the enforcer

On a side not will the enforcer take a wired expander or would it be better to use the euro 46 with a wireless expander?

Link to comment
Share on other sites

Yes, I saw that. Although, it says to call them before you do it, but do you really need to?

Depends

The first few we were getting went setup for dialcapture so you had to ring to swap it over

Latley they come setup for DC and the pins show up as 8001-8008 in mas

We've swapped ARCs aswell so that might have something to do with it.

There's no harm is trying it first :)

Link to comment
Share on other sites

Yes, wish I had now! I was worried though it would permanently configure it for pins and stop reading the capture...


It will. We need to tweek Insite to allow the comms from CSL. Working on it now.

 

How does CSL comms work, translate a faux local IP from the manufacture download program?

Edited by datadiffusion

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.