Jump to content
Security Installer Community

Concept Pro Vpc553 Controller Lead


Onlyme

Recommended Posts

Hi
I have a secondhand zoom cctv camera Concept Pro VCP553. On the back there is a RS485 controller interface (see photo) socket with 7 pins. Can you tell me what type of plug/cable connector will be suitable and where I might buy it online.
Thanks

Onlyme

post-9430-0-87871300-1392895787_thumb.jp

Link to comment
Share on other sites

It's a relatively common connector in a way, just not one you'll easily (if at all) buy in qty of one and a bag of ten pins.

 

You might only be able to solder wires on then fill cavity with glue or potting. If its for a home project, of course.

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

Hi

I have a secondhand zoom cctv camera Concept Pro VCP553. On the back there is a RS485 controller interface (see photo) socket with 7 pins. Can you tell me what type of plug/cable connector will be suitable and where I might buy it online.

Thanks

Onlyme

 

This the one?

 

http://www.ebay.co.uk/itm/181331022874?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Link to comment
Share on other sites

Hi

I got excited when I saw Steveo44's reply but I already have that cable. It is specifically for a Concept pro AIR3026HGE(it connects into the bottom of the camera and allows the menu to be accessed) but would not be suitable for the VCP553

Any other suggestions??? What I want to do is operate the zoom from my Cop DVR PTZ

cheers

 

Onlyme

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.