aintaclue Posted December 7, 2010 Share Posted December 7, 2010 Hi i have installed an ade gen 4 i have 1 door contact and 2 pirs i have zone 1 as the door contact zone 2 as 1 pir which you have to pass to get to the panel zone 3 is a pir at the rear of the property i have programed it to program 1 my problem is when i walk test zone 1 zone 3 lights up as well and visa versa the door contact has 2 wires and each pir has 6 wires with the taps wired in series to the tamp teminals adjacent to zone 8 any ideas what i could have done wrong is i a programming problem? thanks in advance Link to comment Share on other sites More sharing options...
Algon1 Posted December 7, 2010 Share Posted December 7, 2010 Hi i have installed an ade gen 4 i have 1 door contact and 2 pirs i have zone 1 as the door contact zone 2 as 1 pir which you have to pass to get to the panel zone 3 is a pir at the rear of the property i have programed it to program 1 my problem is when i walk test zone 1 zone 3 lights up as well and visa versa the door contact has 2 wires and each pir has 6 wires with the taps wired in series to the tamp teminals adjacent to zone 8 any ideas what i could have done wrong is i a programming problem? thanks in advance I guess you're certain that 1 and 3 are in the correct holes? If your sure you have Id start by taking the tamper circuit out of the panel putting a link in and walk testing it again Link to comment Share on other sites More sharing options...
PeterJames Posted December 7, 2010 Share Posted December 7, 2010 Aintaclue Welcome to the forum but please dont post multiple topics with same question otherwise it causes confusion thanks Link to comment Share on other sites More sharing options...
hpotter Posted December 8, 2010 Share Posted December 8, 2010 my problem is when i walk test zone 1 zone 3 lights up as well and visa versa reckon you got your wires crossed tbo, rather than a progging issue. Link to comment Share on other sites More sharing options...
james.wilson Posted December 8, 2010 Share Posted December 8, 2010 agreed sounds like a wirng issue. maybe post a picture of how you have wired your panel? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
aintaclue Posted December 13, 2010 Author Share Posted December 13, 2010 agreed sounds like a wirng issue. maybe post a picture of how you have wired your panel? hi thanks for your replys guys i have been away so i have not had a chance to look at it again, will check and let you know how i got on thanks Link to comment Share on other sites More sharing options...
9651 Posted December 13, 2010 Share Posted December 13, 2010 zones 1+3 sound crossed to me. Open the door on zone 1, tap in the code and watch the zone lights, the one that on is the door Link to comment Share on other sites More sharing options...
aintaclue Posted December 30, 2010 Author Share Posted December 30, 2010 Hi Guys you were all right it was a Tamper issue the zones were correct but zone 3 pir had a tamper fault, strangly it set ok but when zone 1 was triggered zone 3 went into alarm all fixed now though Thanks for your help and what a great and helpfull website happy new year to you all Link to comment Share on other sites More sharing options...
Rulland Posted December 30, 2010 Share Posted December 30, 2010 Hi Guys you were all right it was a Tamper issue the zones were correct but zone 3 pir had a tamper fault, strangly it set ok but when zone 1 was triggered zone 3 went into alarm all fixed now though Thanks for your help and what a great and helpfull website happy new year to you all Glad you sussed it, thanks for reporting back as well, Happy New Year to you as well. Link to comment Share on other sites More sharing options...
james.wilson Posted December 30, 2010 Share Posted December 30, 2010 Yes thanks for the follow up securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.