keypad zones

zone 1 on keypad mapped out as zone 42---> entry exit

entry exit zone shows as healthy in wintex dp end of ln

meaning zone is mapped and configured correctly!!

yet

when user details are inserted into the keypad to start entry exit no tones start

the keypad just logs into the engineers access?

any ideas

I know generally that control panel zones like to start with zone 1 as entry exit but why give the option to mapp through the keypad which is near the final exit route if this does not appear to work?

Toni

yet

when user details are inserted into the keypad to start entry exit no tones start

the keypad just logs into the engineers access?

I dont understand you. Are you entering an engineer or a user code.

What panel requires Zone 1 to be entry?

Your programming seems to be at fault.

well ive had a bottle of the red stuff, but if ive read your post right - looks to me you are entering eng code.

Is that keypad allocated as "Engineers" only?

Played with a prem recently. Looks good still prefer Gal or Cooper though.

I've removed all the 'off topic' posts.

If the OP is still wanting a resolution, please respond to the answers given.

You have zone 2 of the keypad mapped to zone 42

Post a screen grab of the users, you may have assigned the user code the 'engineer programming' attribute

Edited July 10, 201015 yr by breff

user access code

engineer

master

Rob

Paul

Tony

if you key in an existing code (version 8 software) you will be prompted to change because that user code is already in use