Everything posted by sterling t
-
Help Fitting Texecom Odyssey X-BE bell box to Accenta G3 Alarm
SCB-A. -ve SCB-T. Rtn NEG. stb + +ve B. -bell D. the rest are not needed
-
Hello
Hope this helps.... panel. bell +12v hold off + 0v. hold off - bell. TRIG Strb. STB Tamp. RTN Both boxes can stay as they are, because AG6s sound off their own batteries, No SCB mode required.
-
Zonaplex
-
Romec (TOPLOK) Bell Box help Needed
-
Do you have this alarm protecting your house
??
-
Optima 2 Plus Alarm - External Bell Box and Strobe
oops, didn't mean to comment anything
-
eBay tat roundup - the best and worst from the 'bay
eurobell doesn't have an SAB, don't know why, just connected the tamper switch to a chocker block and then back to the panel
-
alarm system recommendations
yeah, i'll get a euro46 with a wireless expander.
-
alarm system recommendations
Hello, i need some recommendations for a hybrid alarm system, everything will be wireless except the bell box which will be wired. i'm thinking about the euro 46 thanks
-
eBay tat roundup - the best and worst from the 'bay
it's mine now ? got it fitted in the garage connected to a eurobell
-
Oldest Panel
i have the same issue with a logic 4, entry time never ends.
-
does anyone know where i can find a Xenon alarm strobe?
- does anyone know where i can find a Xenon alarm strobe?
i know that they havn't been made for a little while, i collect bell boxes from the 80s/90s and i try and make them complete by putting strobes etc. on- Tann 12v Bell
- does anyone know where i can find a Xenon alarm strobe?
- Racal Guardall IR772
- A1 alarms S.A.B module wiring help!
well, it's not going to be protecting anything, i collect old bell boxes and this is going inside a vented bell box.- A1 alarms S.A.B module wiring help!
i have traced it a bit. things like tamper and trigger are a bit harder to find- A1 alarms S.A.B module wiring help!
i need help with connections. there is no label saying what terminal does what. i would be greatful if anyone can help- old bently alpha panel
i had a chat with the owners yesterday, he said there are even pressure mats at the bottom of each window! apparently the system was installed in 1990, the company that originally fitted it is now long gone. it hasnt been used for about 10 years, they stopped using it because it always falsed etc. all the doors in the house have recessed contacts, quite a lot of the doors have been swapped etc. and contacts havnt been put back again. quite a few wires stick out in various places so occasionally it goes off when hoovering etc. it hasn't had any maintenance since the day it was fitted 30 years ago. trying to find the tamper fault would be like chasing a rat in 100 acre field, there are so many reasons why this system should be shut down! there are 2 live external sounders, hopefully the backup batteries have died.- old bell box identification
- old bently alpha panel
- old bently alpha panel
it is quite old i know the people who have this installed, hasnt been used for about 10 years. hopefully they might allow me to de-commission the system and remove the panel as i am quite fond of it!- old bently alpha panel
deos anyone know anything about this panel. - does anyone know where i can find a Xenon alarm strobe?
Important Information
By using this site, you agree to our Terms of Use.