Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,672

  • Joined

  • Last visited

  • Days Won

    288

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Well fsl is double eol (min) as you can have single eol etc
  2. james.wilson
    Yep
  3. james.wilson
    nearly had a van burn out cos of that, proper melted all around it!
  4. james.wilson
    er?
  5. james.wilson
    yeah whatever
  6. james.wilson
    data problem wire the keypad on a short wire into the panel
  7. james.wilson
    I use ck and knipex
  8. james.wilson
    heres jimmy
  9. james.wilson
    test pattern out of ur test mon
  10. james.wilson
    its a relay so yes
  11. james.wilson
    Like the cable skills, but you should curl it a bit like a huge door loop, plus link out the lid tamper if your gonna run the cable that way
  12. james.wilson
    Pm local lads
  13. james.wilson
    Does the g2 have all the access levels?
  14. james.wilson
    db's?
  15. james.wilson
    its called squark and needs to disabled. as above call ur installer to program it out
  16. james.wilson
    pardon?
  17. james.wilson
    thats not 8243 tho?
  18. james.wilson
    me to but as 9651 says needs agreement at any grade
  19. james.wilson
    ok i stand corrected i thought that was at g2?
  20. james.wilson
    no you can have duress but only at g3 iirc ie if duress is needed then g2 is low risk so shouldnt be needed
  21. james.wilson
    Webway, Redcare or Dualcom all on gsm only?
  22. james.wilson
    Ssaib.org Let us know next week after you get approved
  23. james.wilson
    that's a euro meridian lights and automation can be done on a vanderbilt iPhone?
  24. james.wilson
    Hello
  25. james.wilson
    ire is a basically a reflective count based on the image. Often seen in 0.003 lux at 50 ire. If you have a mirror at x meters gives a 'usable' image. Its supposed to show the sensitivity of the chip way before long exposures etc came into it. plus sync should be 300mv, video should be 700 above sync pulse but its all old school now as that the old PAL system
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept