Jump to content
Security Installer Community

Ronnie

Trade ONLY
 View Profile  See their activity

  • Posts

    3,523

  • Joined

  • Last visited

  • Days Won

    18

 Content Type 

Everything posted by Ronnie

  1. Ronnie
    Get the hell out of there before it blows!!
  2. Ronnie
    Exactly the same? Have you got a spare 232 on the C4 - can you try using this instead of the one yr using now?
  3. Ronnie
    Do you get exactly the same problem with both ways of connecting?
  4. Ronnie
    Are the 2 bits of kit connected by 232 on the same phase?
  5. Ronnie
    Optical isolator - as it says on the tin.. Can you reconfigure the 232 port on C4 to do something else (doesn't matter what) to prove it works properly? Might be putting out ***** and killing the panel?
  6. Ronnie
    Any recent C4 firmware updates been applied? Try updating panel firmware? Do you have a ground between C4 and panel on 232? Does it still do it when you physically disconnect C4 and set from keypad?
  7. Ronnie
    Have you defaulted it? Bit contradictory post too.. Does is fault when setting from the keypad? Does is fault when setting via C4?
  8. Ronnie
    Lol
  9. Ronnie
    are you getting a fault displayed on the C4 or intruder keypad? What specifically does it say?
  10. Ronnie

    Fused Spurs

    Ronnie replied to Kate Scorey's topic in Electrics

    We have 2 or 3 electricians who we work with and they will always put the spurs in for us and test. I actively use the fact we do not install the spurs (as we're not qualified and/or more importantly competent ) and those other firms just chucking in spurs are probably breaking the law. Those non-electricians who install spurs - do you test the work you've done and do the paperwork etc? Thought not.
  11. Ronnie
    who cares it's free!
  12. Ronnie
    but how do you do it?
  13. Ronnie
    how does the block user thing work?
  14. Ronnie
    i don't remember saying that actually, can you direct me to my post where that was said please? yeah, look what you've done!
  15. Ronnie
    see, yet again assumptions. you're assuming we have alarms in london aren't you. we do other things than just alarms and they don't require 4 hours onsite.
  16. Ronnie
    well you can't be talking about me as i don't have second home anywhere. i never moan about working in london, i'd rather not but a couple of our biggest clients have things there we look after so it's not my choice. work is work regardless of where it is but london is still a dump and generally full of *******.
  17. Ronnie
    sometimes you are so full of **** it's unbeliveable. if you care to read the other thread fully, the guy you're talking about is actually heading out on the M4.
  18. Ronnie
    i'm from dorset and i still hate london.
  19. Ronnie
    i detest london with a passion which is a pain as we there at least once a week. if i go it's because i want to see some very specific things so where it is has no impact on the decision to go or not.
  20. Ronnie
    read my post above yours - it might be that it's not kept in sleep mode even when part set.
  21. Ronnie
    part set? bedroom? if a detector isn't included in a part set then i guess it would stay asleep and therefore no LED?
  22. Ronnie
    I thought they went to sleep when the system is unset (isn't that the point of 2 way?) and therefore shouldn't come on anyway??
  23. Ronnie
    that is scary!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept