al-yeti
-
Posts
9,135 -
Joined
-
Last visited
-
Days Won
116
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by al-yeti
-
Most diallers factory set to negative trigger so connecting to your bell trigger will also work if you don't know how to programme the pgm output (unless it's the same on this panel)
-
Ez What he's possibly asking is if you u twisted all the pair's and got the legs mixed up, although I understand what you mean to Is the cat6 shielded? As on bench length would short , others here have mentioned about this
-
Pyronix as well? Well then who else will be next means third party like webway have more difficulties ahead? Or not really
-
Lol yeah not my business model but scanny on pins no?
-
Lol thanks my English + android gets the better of me +rodent(1)
-
Come on don't be sensitive
-
Good time to get rid of all together admit it doc
-
Soldering won't do Jack unless you didn't loop them correctly at PIR end first time
-
I think now it's time for a hole cutter chop up the floor and find the fault
-
What's the point he's got a cable fault
-
Is there a room above pir you can lift carpet and floor board and have a look
-
Yeah you can try that , either way if not prepared to pay an engineer then you have to try yourself (don't loop the power obviously)
-
Could be cable fault Loop it at the pir if it clears, that will to a point show it's pir at fault and then as above replace pir
-
Lol still don't know what you mean , what you mean non plug in , thought they all plug in somewhere
-
Budget?
-
Temporary fix move ribbon cable about a bit or push it in should resolve the keypad issue short term Otherwise change the panel its old hat now I would concentrate on the panel before bell box though , link tr or t at. Panel to 0v temporarily while you try and fix keypad issue Better to scrap it though
-
Yeah but that's just guessing man I thought when the word Rom was mentioned I thought he connected some device hacked into the Rom and fragglesRUs
-
What you mean brute force then
-
What dialler are you using ? , normally has a daily or weekly alert to keep SIM going And too it up every 6months or so unless you got regular false alarms Cheaper just to get a virgin SIM £5 until July, monthly rolling, then I think it's goin up a bit But that's if you have sia sent via your dialler you need the contract SIM for that
-
Well seems what your doing is ok, and as above when you connect the battery it will siren as cover is open , this was me too ed above, if cable is ok and bellbox is ok and your panel isn't faulty then when you connect the battery the bell will sound until you close the lid and close the tamper
-
As previously said forget about the strobe +
-
Ok so just type how you wired what connection to what
-
How have you wired it
-
So does this mean every electronic piece of equipment should have there engineers access unlocked for jp to openly to have? Not talking about what's available in internet So from washing machines to tv's to alarms fire etc etc as long as there is a fee paid everyone should hand over the access to the engineers menus, coolio Should be fee based , and based upon another maintainer asking for it and they bill the customer and pay you?
-
Mini you?