reidy

The only thing I've found in airing cupboards are towels and alarm panels with toasted batteries, lucky me eh

Bang on

I suspect the way the people who make the regs will have looked at this is, is that it is catastrophic failure (i.e. not likely to happen). Unfortunately they don't seem to realise how simple it is to block GSM/GPS signals and cut telephone lines, you can do both outside the protected area for heavens sake

Apologies, I didn't read all of your post Try setting a UDL password and using that, when I tried that, it does sort of work but usually results in crashing my ComIP module causing a com port fault

TFTP isn't enabled by default in Windows 7, this should help http://www.andrels.com/wp-en_US/index.php/2009/12/how-to-enable-telnet-and-tftp-client-on-windows-7/

Its an SDK with working examples, only got the online keypad just about working in the end and it tended to just crash the ComIP module 99% of the time anyway

OFA

Is it bells only? Premier's come out the box with anti-code reset enabled because its a proper graded panel, you need the installer to come around and disable the feature in the engineering programming menu's If the installer just gives you a reply to what the keypad quotes, you will encounter the same problem again next time it activates

It died or you killed it

Does the alarm activate when you set the system and walk in front of the PIR?