Jump to content
Security Installer Community

reidy

Trade Full Member
 View Profile  See their activity

  • Posts

    812

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by reidy

  1. reidy
    Its official function is to clear the comms buffer but how it actually achieves that I don't know. It's probably just a glitch since you are doing it in anger but it can work from time to time
  2. reidy
    Yeah, it spams the processor and can clear random stuck in the background faults. Has a low success rate but worth trying before powering down a panel
  3. reidy
    Came out a few months back
  4. reidy
    You need to make sure the ComIP has outbound access to the receiver and your Montex receiver has inbound access on port 10001, make sure coms is started in setup on Montex In Program Digi your Primary No. should be the receiver IP address in this format xxx.xxx.xxx.xxx/10001
  5. reidy
    tw*t
  6. reidy
    The LED's have been changed now Its a good unit, just follow the instructions and you'll be fine
  7. reidy
    LOL I can only imagine his managers response when he reads that docket
  8. reidy
    Even closer now I am indeed but its definitely a move I needed to make, things are so much better now and I've learnt loads over the past few months
  9. reidy
    I knew this day would come, thank **** I don't work there anymore!!!!
  10. reidy
    The only thing I've found in airing cupboards are towels and alarm panels with toasted batteries, lucky me eh
  11. reidy
    Bang on
  12. reidy
    I suspect the way the people who make the regs will have looked at this is, is that it is catastrophic failure (i.e. not likely to happen). Unfortunately they don't seem to realise how simple it is to block GSM/GPS signals and cut telephone lines, you can do both outside the protected area for heavens sake
  13. reidy
    QFA
  14. reidy
  15. reidy
    Don't you live in a council flat?
  16. reidy
    +1
  17. reidy
    Personal taste I guess, I used to work for a co that didn't like staples, everyone had a gun in their bag Staple gun that is
  18. reidy
    I can understand why people dislike them, used incorrectly they can look disgraceful
  19. reidy
    Road surfaces aren't to bad near me but the local council have blown a great wad of cash building "the great wall of norden" which still isn't finished (6 months now) Plenty of tame feckers though, doing 35 in a 60 should be punishable by fire
  20. reidy
    Apologies, I didn't read all of your post Try setting a UDL password and using that, when I tried that, it does sort of work but usually results in crashing my ComIP module causing a com port fault
  21. reidy
    TFTP isn't enabled by default in Windows 7, this should help http://www.andrels.com/wp-en_US/index.php/2009/12/how-to-enable-telnet-and-tftp-client-on-windows-7/
  22. reidy
    Its an SDK with working examples, only got the online keypad just about working in the end and it tended to just crash the ComIP module 99% of the time anyway
  23. reidy
    OFA
  24. reidy
    Is it bells only? Premier's come out the box with anti-code reset enabled because its a proper graded panel, you need the installer to come around and disable the feature in the engineering programming menu's If the installer just gives you a reply to what the keypad quotes, you will encounter the same problem again next time it activates
  25. reidy

    got hit in the face by a birds nest whilst replacing a bell box in the dark tonight lol

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept