MrHappy

Why not just fill a box with horse manure? There's a good chance they might confuse it with Danmini YA-500....

you'd make a cracking mod...

you'll need a udl code generator too..

How do would you feel when you see your codes on the list ? Cool, don't forget to charge enough to for the "Free of Charge" revert to defaults sometime in the future

LOL, I've had people kicking off about "locked" 700l's

Alarm subscribers.... As a rule of thumb if the incoming co. needs wet nursing by the out going co. so they can support the system you may find you picked the wrong people to look after your alarm

Lockable, when selected it won't default Resistor values are selectable on the M

a bracket, do you need it to tie your horse up ?

TBH TG has been **** for a while...

shame wss don't do twitter

when they fail, so between 1 week & 25+yrs

self activating bell... when the hold supply is removed the bell rings off its own battery

possible causes of a "chattering relay" relocating a London relay to Scotland - relay is cold turn up heating until its acclimated ? relocating a Scottish relay to London - Irn-Bru & Battered mars bar withdrawal ?

Just in the process of completing a refurbishment with int, fire, access & cctv I'm of the opinion none of the electrical installation has been tested the FP feed to the fire alarm had dead short on it (L+E) sparks had drilled though it weeks ago, No continuity on L for the cctv & access ring main in the server rm, but all energised

hello les

Ding!

an old A&G panel came in last week, but I would assume its way too modern...

Putting them on a "wall of shame" would not achieve this, Among others,

Perhaps if the NSI did something a little more proactive to protect their brand eg- maybe chances would think twice ?

I spy with my little eye... http://web.archive.org/web/20130802052422/http://redcctv.co.uk/contact.aspx Looking at their current web site I see

injunction ?

Was the loosing party retaining you as an employee ?

ISO requirement ?

IMHO the equipment is fit for purpose, due to checks & balances in put in place. (Every day there's activation reports received which are checked against our records so we should be able to find system reset w/o aid of ARC / installer) Anti-code reset is a cheap & cheerful way of providing a simple means to manage the resetting of signalling alarms, high levels of cryptography ain't a big issues for me. Don't forget where still in as world where lots of systems are still on redcares & digi as mobile & internet ain't everywhere.