Intellisense Securit 802 Cannot enter walk test mode

[graham.wh018]

Hi

 

Anyone had this issue. Intellisense Securit 802 control panel (quite old now) will not enter walk test mode using either main panel or remote panel key pad. Soon as * pressed there is an audible sound from the internal sounder. Nothing in the manual, nor could i find anything on searching threads on the site.

 

Be grateful for any help

 

Graham

[MrHappy]

power it down fully & then see if the function comes back

 

other wise live without or replace it

 

[james.wilson]

I don't think that is the procedure for walk test. Are you just pressing *? 

[sixwheeledbeast]

Isn't it something like Code*93? They are a domestic panel you can usually live without a walk test if your within hearing distance of the speaker.

[graham.wh018]

Hello

 

Thanks for the reply's. sorry for the confusion. I am pressing *9,4 to enter walk test mode.

Ill try power down totally tomorrow. 

Thank you

 

[james.wilson]

I think you need to enter the code first