james.wilson Posted May 10, 2023 Share Posted May 10, 2023 4 hours ago, al-yeti said: James is pointing out that your connecting to a relay which unless wired correctly will do nothing Assuming the relay is triggered on alarm the no can stay in the bell trigger , but the c (common needs to connect to negative or minus or -ve ) that way when the alarm triggers it will connect the bell trigger to the negative it requires to ring it Strobe I am not sure , the other outputs are programmable perhaps and you need to look at menus what they can do Agreed can you post a pic of the panel wiring Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
james.wilson Posted May 10, 2023 Share Posted May 10, 2023 4 hours ago, al-yeti said: Actually opto relays , I couldn't be bothered to see what and how they work in the panel other than that optical relays work similar Opto relay is electrically isolated can't see the point on board tho unless it's known the board has shit loads of noise on it Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted May 10, 2023 Share Posted May 10, 2023 10 hours ago, james.wilson said: Agreed can you post a pic of the panel wiring Quote Link to comment Share on other sites More sharing options...
Naeem ahmed Posted May 10, 2023 Author Share Posted May 10, 2023 Hi thanks for getting back to me I will send picture of panel and wiring when I get home thankyou Kind regards Naeem Quote Link to comment Share on other sites More sharing options...
Naeem ahmed Posted May 10, 2023 Author Share Posted May 10, 2023 3 hours ago, Naeem ahmed said: Hi thanks for getting back to me I will send picture of panel and wiring when I get home thankyou Kind regards Naeem Hi here is a pic of the panel wiring Hi here is a picture of panel wiring bell trigger is in white and yellow is strobe Quote Link to comment Share on other sites More sharing options...
james.wilson Posted May 10, 2023 Share Posted May 10, 2023 yuo may need a resistor between bell trigger and ho+ something about 10k Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Naeem ahmed Posted May 10, 2023 Author Share Posted May 10, 2023 Hi thanks for getting back ok will give it a try but what is ho+ please Quote Link to comment Share on other sites More sharing options...
james.wilson Posted May 13, 2023 Share Posted May 13, 2023 On 10/05/2023 at 17:30, Naeem ahmed said: Hi thanks for getting back ok will give it a try but what is ho+ please Hold off positive Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Naeem ahmed Posted May 14, 2023 Author Share Posted May 14, 2023 Hi thanks sorry for getting back late the bell is working now but I can't get the strobe to work when I do a test between the negative and strobe it works but it doesn't work when alarm is ringing I got it in ou2 and program it in outputs but still nojoy Quote Link to comment Share on other sites More sharing options...
james.wilson Posted May 14, 2023 Share Posted May 14, 2023 must be output problem either blown output or programmed wrong Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.