Pyronix Enforcer to Honeywell AG6 Siren?

[garnayrob]

Hi all,

 

Could I please get some wiring guidance on connecting a Honeywell AG6 external siren to a new Pyronix Enforcer panel (v10).

 

I’ve made some assumptions on the siren terminals (left side) and just need to fill in the blank on the right for the Tamper Return: 

 

ST- = STRB 

R- = ???

SW- = BELL

V+ = +12v

V- = COM

 

Many thanks! 

 

Rob

Edited November 3, 2020 by garnayrob

[al-yeti]

1 hour ago, garnayrob said:

Hi all,

 

Could I please get some wiring guidance on connecting a Honeywell AG6 external siren to a new Pyronix Enforcer panel (v10).

 

I’ve made some assumptions on the siren terminals (left side) and just need to fill in the blank on the right for the Tamper Return: 

 

ST- = STRB 

R- = ???

SW- = BELL

V+ = +12v

V- = COM

 

Many thanks! 

 

Rob

No good for the enforcer as it doesn't have scb mode , get a better bell for extra tenner

 

Apart from that look at zone and bell on manual and your done 

[garnayrob]

2 hours ago, al-yeti said:

No good for the enforcer as it doesn't have scb mode , get a better bell for extra tenner

 

Apart from that look at zone and bell on manual and your done 

Thanks