Now it’s pissing memoff

 

Peogrammed sensors to off in main panel (program zone types) and still triggers a tamper alarm frequently

 

Tried taking battery out and this triggers another error code with an “L” after it when trying to set the alarm. 
 

Any ideas please

"L" means lost,

 

"delete the circuit off " aka remove the transmitter in the zex menu 91-98 or whatever +no ?

8 hours ago, MrHappy said:

"L" means lost,

 

"delete the circuit off " aka remove the transmitter in the zex menu 91-98 or whatever +no ?

Hi and thanks for the reply but I am still a bit confused. I have the programming manual for the panel but can’t find the program option to remove the transmitter . You refer to the zex menu but not exactly sure what you mean .

 

Soory to be dim but am not super familiar with this setup 

29 minutes ago, paulbaker1954 said:

Hi and thanks for the reply but I am still a bit confused. I have the programming manual for the panel but can’t find the program option to remove the transmitter . You refer to the zex menu but not exactly sure what you mean .

 

Soory to be dim but am not super familiar with this setup 

You using right access code?

You need to enter eng code then user code.... scroll to Zones....enter 50 Yes and work your to disable wireless zones etc.

19 hours ago, Hillbilly said:

You need to enter eng code then user code.... scroll to Zones....enter 50 Yes and work your to disable wireless zones etc.

Sorry there ain’t no zone 50 

 

it’s a gardtec panel with a a separate wireless box wired in to the main panel

2 hours ago, paulbaker1954 said:

Sorry there ain’t no zone 50 

 

it’s a gardtec panel with a a separate wireless box wired in to the main panel

You menu menu 50?

29 minutes ago, al-yeti said:

You menu menu 50?

Menu 50 is zone wiring (EOL) etc

23 hours ago, paulbaker1954 said:

Menu 50 is zone wiring (EOL) etc

Thanks all got it figured out now ???

I meant when it says programme zones go 50 yes.