Hi, my alarm has no model name showing and it's PCB doesn't seem to match any installation manuals I have seen.

 

I was thinking it might be a Veritas R8, but the vertical terminal block on the far right is a mystery. it is labelled R/R, L/M, 1, ... 8 - any ideas what that is for?

 

 

I see a veriats r8+ from around 15yrs ago with bits of tape on the global tamper circuit

 

remote reset. line monitor & channels 1-8...

Edited July 2, 20205 yr by MrHappy

Ah, that makes sense thanks a lot.

9 hours ago, MrHappy said:

I see a veriats r8+ from around 15yrs ago

I think you lost a few years somewhere

 

Pre-2000 model (year 2000), has different programming and PCB layout than the current version.

33 minutes ago, sixwheeledbeast said:

I think you lost a few years somewhere

 

"around" is near enough

 

36 minutes ago, sixwheeledbeast said:

Pre-2000 model (year 2000), has different programming and PCB layout than the current version.

 

none of this would be my problem..... as its skip fodder ?