Stellarat Posted July 2, 2020 Share Posted July 2, 2020 Hi, my alarm has no model name showing and it's PCB doesn't seem to match any installation manuals I have seen. I was thinking it might be a Veritas R8, but the vertical terminal block on the far right is a mystery. it is labelled R/R, L/M, 1, ... 8 - any ideas what that is for? Quote Link to comment Share on other sites More sharing options...
MrHappy Posted July 2, 2020 Share Posted July 2, 2020 (edited) I see a veriats r8+ from around 15yrs ago with bits of tape on the global tamper circuit remote reset. line monitor & channels 1-8... Edited July 2, 2020 by MrHappy Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Stellarat Posted July 2, 2020 Author Share Posted July 2, 2020 Ah, that makes sense thanks a lot. Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted July 2, 2020 Share Posted July 2, 2020 9 hours ago, MrHappy said: I see a veriats r8+ from around 15yrs ago I think you lost a few years somewhere Pre-2000 model (year 2000), has different programming and PCB layout than the current version. Quote Link to comment Share on other sites More sharing options...
MrHappy Posted July 2, 2020 Share Posted July 2, 2020 33 minutes ago, sixwheeledbeast said: I think you lost a few years somewhere "around" is near enough 36 minutes ago, sixwheeledbeast said: Pre-2000 model (year 2000), has different programming and PCB layout than the current version. none of this would be my problem..... as its skip fodder 1 Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.