Hi

 

A quick query about my self-installed Galaxy G2-20 panel and zone status in Menu 21.

 

I have three Honeywell Wireless IR(PI)8M PIR's connected via a C079-2 RF Portal. In addition, several wired PIR's.

 

The wireless PIR's have connected to the panel fine and I get the serial numbers and signal strength information etc..

 

When testing the wired PIR's I can see the current status of these (OPEN/CLOSED) in Menu 21 Zone Status depending on the live detection. However, I do not get a toggle between OPEN and CLOSED in Zone Status for my wireless PIR's if I place a live movement (a cooperating family member) in those rooms - is this normal?

 

When I do a walk test the wireless PIR's detect me correctly and the system works fine.

 

The lack of a live zone status for the wireless PIR's is just niggling me.

 

Many thanks

 

 

I dont think they do it. its 2 way rf so the sensors will shutdown unless armed or in walk test to save battery life

They trigger once and send signal and then you have to wait before they trigger again , but yes don't show open close very well otherwise 

 

You don't need it anyway lol

okay thank you