Jump to content
Security Installer Community

Euro46 Unset By Any? (Fob, Code, Tag, App)


Vini

Recommended Posts

It seems my Euro46 App panel only likes to unset using the same method it was set by, with the exception of code which unsets happily... Is there a way to config the panel to unset by any, regardless?

 

For example, I set by App earlier, and she tried to unset using her Tag, but was unable to and had to resort to Code.

 

We only have Zone A configured, and all codes, tags, fobs and app are configured to set/unset A only.

 

Flexi Set is on for Code, but nothing else. Flexi Unset is off.

Link to comment
Share on other sites

3 minutes ago, james.wilson said:

no you should be able to unset with any means. I would say you have a config issue. 

Someone in another thread said default whole panel when it doesn't work lol, although you may just need to change something small 

Link to comment
Share on other sites

I checked the logs last night and found the issue. I'd "Full Set via App (A)", but the tags are programmed to unset only (B). When part setting (B) using the App/Fob/Tag and trying to unset via the App/Fob/Tag (B), all is well.

 

 

Regarding the fob I have a different issue altogether, it sets fine, but I've not really had much luck in getting the Fob to actually unset. But I'll look into that again.

Link to comment
Share on other sites

1 hour ago, Vini said:

I checked the logs last night and found the issue. I'd "Full Set via App (A)", but the tags are programmed to unset only (B). When part setting (B) using the App/Fob/Tag and trying to unset via the App/Fob/Tag (B), all is well.

 

 

Regarding the fob I have a different issue altogether, it sets fine, but I've not really had much luck in getting the Fob to actually unset. But I'll look into that again.

So your saying now the fobs as in remote control type and tag as in proximity tag

 

I think the remotes also have options for that

Link to comment
Share on other sites

7 hours ago, al-yeti said:

So your saying now the fobs as in remote control type and tag as in proximity tag

 

I think the remotes also have options for that

 

Correct. The fob seems to be configured correctly, but isn't doing something. I'll investigate over the weekend.

 

Pyronix KEYFOB-WE 4 button Wireless Setting Fob

kf4-we-keyfob.jpg

 

 

Pyronix EUR-ETAG

e-tag.jpg

 

Link to comment
Share on other sites

22 minutes ago, Vini said:

 

Correct. The fob seems to be configured correctly, but isn't doing something. I'll investigate over the weekend.

 

Pyronix KEYFOB-WE 4 button Wireless Setting Fob

kf4-we-keyfob.jpg

 

 

Pyronix EUR-ETAG

e-tag.jpg

 

So the fob also has options 

Link to comment
Share on other sites

  • 2 weeks later...
On 03/01/2019 at 23:20, james.wilson said:

no you should be able to unset with any means. I would say you have a config issue. 

As before op you still have config issue and your missing it or mixed something up

1 hour ago, Vini said:

Had some time to tinker. No joy. The fob will just not "unset".

 

image.png.5e67b63a01f36c9d6ffd68f1976e6b49.png

 

 

Save the config current and default the panel and only setup the remotes 

Link to comment
Share on other sites

9 hours ago, MrHappy said:

you press the open padlock & its sets level b ?

 

Did I already ask if you are in IT ?

 

I assume rkp is in all area's & you have level setting selected ?

 

 

Padlock/I are configured to SET B

Unlock/II are configured to UNSET B

 

Setting works fine, un-setting does nothing, just flashes red.

 

Yes, I am in IT.

Link to comment
Share on other sites

On 16/01/2019 at 13:15, Amps said:

Check ‘System Options’

61FF11B7-8DD8-4998-B6BB-A7E862CC05FB.jpeg

 

Internet beers for this man!

 

Thank you very much @Amps - that was the fix! The panel was set to YES, switched to NO and all is well.

 

 

On 16/01/2019 at 16:06, grantc said:

Why are you using 2 buttons to unset b?

The unlock button should be setup for unset any

 

Was 'testing', just wanted to triple check the fob wasn't defective.

Edited by Vini
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.