Jump to content
Security Installer Community

Risco door contact error


Scotwarner2000

Recommended Posts

Hi all, I recently removed a risco door contact from its door frame to repaint the frame.  Once putting the door contact back on the door frame the alarm is now saying that there is an error.

 

I have a gardtec 600 control panel which states ‘error please enter code’ and when I put the code in to set the alarm it says I need to contact the security firm.

 

Anyone able to assist with fixing this error without me having to pay for an engineer!

 

Thanks!

Link to comment
Share on other sites

2 minutes ago, Scotwarner2000 said:

Hi all, I recently removed a risco door contact from its door frame to repaint the frame.  Once putting the door contact back on the door frame the alarm is now saying that there is an error.

 

I have a gardtec 600 control panel which states ‘error please enter code’ and when I put the code in to set the alarm it says I need to contact the security firm.

 

Anyone able to assist with fixing this error without me having to pay for an engineer!

 

Thanks!

Pictures , make few posts and upload pictures , but you may have had resistors inside it and wired it all back wrong 

Link to comment
Share on other sites

1 hour ago, petercts said:

They have the most awkward rear tamper it is a problem to locate the rear spring onto the back plate:(  bet the tamper is on engineers reset :joker: 

Ah I get it now , I did usual didn't read the stuff proper

 

So it's code reset , does the software do it over the phone on this panel?

 

Meaning read code code sequence etc

Link to comment
Share on other sites

15 hours ago, Scotwarner2000 said:

Hi, It’s a wireless shock and contact detector so I’ve not touched he wiring. I simply removed the panel from the mounting.

As per PeterCTS's comment, I suspect the company will have engineer reset on the tamper.

Have you checked the battery has not come lose?

If you tap on the casing does the LED light?

Link to comment
Share on other sites

The risco is in a class of it own :unsure: the manual 110 odd pages they recommend one whole days   training for experienced engineers two if your not   it is read the manual several times

Then go to the wholesaler buy a Texecom or Enforcer  and fit that :D I use one in my junk box to hold the shed door open 

you will end up calling your installer to reset it is designed to be a earner  did the outside sounder trigger when you took the unit off and show a tamper  a hammer logo:smash:

Link to comment
Share on other sites

14 hours ago, petercts said:

The risco is in a class of it own :unsure: the manual 110 odd pages they recommend one whole days   training for experienced engineers two if your not   it is read the manual several times

Then go to the wholesaler buy a Texecom or Enforcer  and fit that :D I use one in my junk box to hold the shed door open 

you will end up calling your installer to reset it is designed to be a earner  did the outside sounder trigger when you took the unit off and show a tamper  a hammer logo:smash:

The op is talking about the gardtec 600. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.