Guys 

i havent installed a sd1+ for a few years now but i did one for a friend. On the sd1 dialler do i wire it to A or o/p1 (next to 12v supply)? 

 

I’ve had a memory loss lol but didnt want to blow it. 

 

Thanks

Come on guys, surely someone has fitted an SD1+ dialler that can help??

Just a guess but o/p1 will be an output, not an input...

 

What are you wiring and didn't it come with a  manual?

1 hour ago, Ghost said:

Guys 

i havent installed a sd1+ for a few years now but i did one for a friend. On the sd1 dialler do i wire it to A or o/p1 (next to 12v supply)? 

 

I’ve had a memory loss lol but didnt want to blow it. 

 

Thanks

Trigger A yes , (NOT A for phone line )

 

Just be sure to record message A correctly

8 hours ago, norman said:

Just a guess but o/p1 will be an output, not an input...

 

What are you wiring and didn't it come with a  manual?

 

8 hours ago, al-yeti said:

Trigger A yes , (NOT A for phone line )

 

Just be sure to record message A correctly

Thanks

 

i just left a message on phase 0. I’m wiring it off a G2-12 galaxy. 

But when I wired it to A it was ok but when we set the alarm it was calling. So it calls when bells trigger and when we set

On 3/11/2018 at 08:14, Ghost said:

 

Thanks

 

i just left a message on phase 0. I’m wiring it off a G2-12 galaxy. 

But when I wired it to A it was ok but when we set the alarm it was calling. So it calls when bells trigger and when we set

where is trig a wired into on the galaxy? probably need to change output type from calling when set

On 3/11/2018 at 08:14, Ghost said:

 

Thanks

 

i just left a message on phase 0. I’m wiring it off a G2-12 galaxy. 

But when I wired it to A it was ok but when we set the alarm it was calling. So it calls when bells trigger and when we set

Just connect the trigger to the bell trigger