Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

8 core cable internal sounder + PIR

Cluel3ss
in !!..DIY Installers..!!

Featured Replies

On my garden office I fitted a PSU200XP off which I have an external bell box, door contact, PIR's, fire and keypad.  Also a small extension speaker so I can hear chimes from the house doors.

 

A short run is usually ok to share cables with speaker, but not on a long run and especially not with keypads as you'll get network errors.

 

 

Edited by installer_dale

  • Replies 27
  • Views 8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Most Popular Posts

  • antinode
    antinode

    Run a 16 ohm speaker from the speaker output on the keypad (if you've got the LCDL type, if you haven't I would recommend as the screen is much better on these), it'll make a loud enough racket in ala

  • al-yeti
    al-yeti

    So linked sound option   Generally +12v to +12v  Gnd to an output that switches from 12v to ground, bell output or another pgm     

Posted Images

  • Author

Ahh good point, hadn't thought about if it didn't have a battery then with a broken wire it won't work. Presumably that'll be the same if someone cuts the cable ...although the main alarm siren should go off. Hmm more food for thought.

 

Unfortunately I can't use a speaker output as the pad i'm using there is the LCDP, the LCDLP will be used in the house.

Circles , just whack a sounder in the spares of the Pir , it will work fine

  • Author

Yep, ordered and will put it next to PIR. I'll update with how i get on with it.

  • Author

So i've wired it up, but now i'm not sure how to wire it up to the alarm panel.

 

The wiring standard i've followed is the linked sound and flash as attached.

 

On my panel i'm using EOL for the sensors so i'm not using the tamper circuit.

 

I think i'm supposed to connect it to the bell block, so +ve to 12v and -ve to 0v, is that correct?

 

Also do I wire the tamper wires to Tamp, and 0V?

 

 

2017-08-20 19.41.18.jpg

So linked sound option

 

Generally +12v to +12v 

Gnd to an output that switches from 12v to ground, bell output or another pgm 

 

 

    • Like 1
    • Author

    Thanks i'll look at it properly hopefully this weekend.

    • 2 weeks later...
    • Author

    Just a quick update... both PIR and internal sounder are working.

    The sounder is very loud and makes the room uncomfortable to hang around in.

     

    Thank you all especially al-yeti!

     

    Create an account or sign in to comment
    Go to topic listing

    Important Information

    By using this site, you agree to our Terms of Use.

    I accept

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.