Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Aritech Ultrasonic PIR with ADE Optima plus

ThornGamma6
in Detector Queries (Public)

Featured Replies

Hi, Today I was trying to fix a friends burglar alarm which has being going off in the day and at early hours of the morning sometimes. He asked me if I could take a look at it and so I did the tamper circuit and all the wiring in the devices such as PIR's, Door/window contacts, PA button and the bell box all looked ok and I couldn't see anything wrong with the wiring or the tampers on all the devices on the system. I did put a new back up battery in the panel just in case that was causing the problem and then I screwed the cover back on to the Optima plus and made sure it wasn't over tightened but still nice and secure. Then I just checked the 2 PIRs and the 2 door/window contacts and one of the PIRs is an old Aritech Ultrasonic and the second PIR is an old Microwave detector could the 2 PIRs be the problem?

 

which circuit is activating. 

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

  • Author
Just now, james.wilson said:

which circuit is activating. 

He said it's normally zone 2 activating which is the Ultrasonic PIR 

You measured stuff with a multi meter ?

Mr th2.jpg Veritas God

  • Author
Just now, MrHappy said:

You measured stuff with a multi meter ?

Yes

 

what measurement have you taken ?

Mr th2.jpg Veritas God

  • Author
Just now, MrHappy said:

what measurement have you taken ?

Voltage

 

at the panel ?

Mr th2.jpg Veritas God

1 hour ago, ThornGamma6 said:

He said it's normally zone 2 activating which is the Ultrasonic PIR 

Link it out at the detector, if it still keeps going off then its either the panel or the cable, if it stops then its the ultrasonic

  • Author
Just now, MrHappy said:

at the panel ?

Not just the panel the PIR's, Door/Window contacts, PA button and the bell box

Create an account or sign in to comment
Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Terms of Use.

I accept

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.