Jump to content
Security Installer Community

Recommended Posts

After some help chaps.

I am quoting a site with off site monitored cctv and using a Hik NVR, this isn't my problem.

The problem is I am proposing to put a 5m column 100m from the main building with a wireless bridge to connect to the PTZ. There is not going to be any ground works on site as there is already 240v at the PTZ location, it's in the middle of a farm type area.

Now I need a tanoy on the column. Question is how do I transmit the Audio over the wireless bridge??

I have no problem fitting a 2nd amp at the column but don't want my ARC having two IP addresses for the audio. As the whole site needs one audio source.

Any ideas appreciated.

Link to comment
https://www.thesecurityinstaller.co.uk/community/topic/40939-audio-over-ip/
Share on other sites

hik doesn't do broadcast audio like that it needs to use the audio out for most arc's. Its a shame you cant set the cams audio out to be global

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

1 hour ago, james.wilson said:

you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik

We have done this on a monitored site and had to tell the arc which cameras had the horns. We had 6 cameras in a rectangle car compound with a horn on every other camera.

agreed but that needs target camera for audio they tend to use the global output

real world stuff not what you ask

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

We have another site like this and it's a mess as the arc has 3 different Ip addresses for audio in different areas, not the best as most of the time the operators **** it up.

1 hour ago, james.wilson said:

you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik

 

Would need to check this as I think Sentinel may have fixed this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.