hello i wonder if i could get some help as i am not getting a bell box until christmas. would anybody be able to tell me how to bypass the bell tamper so i can exit engineers mode as i can't with out the tamper closed.

 

 

thanks.

Ov to the tamper 

 

Although new bel might not solve your problem , example if you bypass the bell tamper , then get a new bell reconnect cable and you still have a bell tamper then what?

 

Maybe you need something else apart from a bell

Edited November 29, 20169 yr by al-yeti
Spelling doh

4 minutes ago, al-yeti said:

Ov to the tamper 

 

Although new bel might not solve your problem , example if you bypass the bell tamper , then get a new bell reconnect cable and you still have a bell tamper then what?

 

Maybe you need something else apart from a bell

thanks it worked but i can't set the system in day/normal mode any information would be appreciated 

1 minute ago, jacobpem said:

any information would be appreciated 

 

Did you know that the Latvian parliament is called the 'Saeima'?

 

But if you mean regarding your alarm, it might help for us to know what error you are getting that's stopping you setting, and what happened to cause the bell tamper.

Just now, datadiffusion said:

 

Did you know that the Latvian parliament is called the 'Saeima'?

 

But if you mean regarding your alarm, it might help for us to know what error you are getting that's stopping you setting, and what happened to cause the bell tamper.

when i try to set the system i key in my passcode then press the a button for full set then it says status unset then it automatically goes into engineering mode.

 

so you haven't got it out of engineer mode then?

Just now, james.wilson said:

so you haven't got it out of engineer mode then?

yes it goes in to day mode 

 i made this vid explaining it all

 

Use user code

 

So you got this hooked up to your room and experimenting?

ok

 

Just now, al-yeti said:

Use user code

how do i change it

 

Have you tried default user codes?

 

As you got the default engineer code I assume , or it was given to you so you should have a managers / user code