tc123 0 Report post Posted June 3, 2016 can anyone help please?i had my l/top connected to an inspire silver and bang my l/tops failed.bought another but my cctv eng needs the dvr password to connect it and guess what ive mislaid it ahhhh is there a default p/word? any help much appreciated regards............ Share this post Link to post Share on other sites
james.wilson 439 Report post Posted June 3, 2016 I would of thought it was setup at install Share this post Link to post Share on other sites
tc123 0 Report post Posted June 3, 2016 Quote hi james he said he needs the dvr password to set up ? or the default. cheers....... Share this post Link to post Share on other sites
james.wilson 439 Report post Posted June 4, 2016 I know what you mean but most people would change from default on initial setup for security Share this post Link to post Share on other sites
tc123 0 Report post Posted June 4, 2016 hi james, yea understand what you mean, im not sure how to get around it maybe I will have to buy a new dvr!! don't want to but the engineer said he can try some codes but it could block the system.. Share this post Link to post Share on other sites
PeterJames 326 Report post Posted June 4, 2016 Sometimes a complete cold start will default it, down power open it up remove battery wait a couple of hours for the caps to discharge, power up without battery, try default passwords admin 1234, or admin admin, or admin password. If none of those work through in bin and buy a new one. Share this post Link to post Share on other sites
tc123 0 Report post Posted June 4, 2016 hi thanks james I will give it a go..all the best ta. Share this post Link to post Share on other sites
J&D Security 3 Report post Posted June 4, 2016 Call the manufacturers tech support. They may be able to help get you back in, but may only talk to someone in the trade. Share this post Link to post Share on other sites
