Fearghal Posted May 24, 2014 Share Posted May 24, 2014 I have just recently moved into a new house with a Aritech cs350 alarm system installed. The landlord does not know the code(s) to the system. It's also flashing "low battery". Can anyone suggest how I could reset the code for the system so that I can use it myself? Is there a helpdesk or something I can call? Also if the battery dies will the alarm start going off? I won't have the code to stop this if it does! Thanks Link to comment Share on other sites More sharing options...
SouthernBrad Posted May 24, 2014 Share Posted May 24, 2014 The best thing to do would be to contact the company that installed it and get it serviced along with a new battery.Low battery sounds like it's been neglected for quite some time and could do with a good check over before you use it incase it has faults and id forever false alarming.Explain to the surveyor you wan't to delete the old codes and use new ones. Link to comment Share on other sites More sharing options...
datadiffusion Posted May 24, 2014 Share Posted May 24, 2014 Or ask the landlord to! So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
norman Posted May 24, 2014 Share Posted May 24, 2014 Depends on the lease... Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.