forrester Posted March 10, 2013 Share Posted March 10, 2013 Thanks for your help anyway. To cap it off I will wire tamper in series. If but any chance it still does not work, the only thing it could be is the current consumption, which can hopefully be cured by the jumper being moved to scb. Will post results Link to comment Share on other sites More sharing options...
Oxo Posted March 10, 2013 Share Posted March 10, 2013 I`d SCB it anyway. Link to comment Share on other sites More sharing options...
forrester Posted March 10, 2013 Share Posted March 10, 2013 Ok. Why does the deltabell have two tampers? Is it as you state to be used when wiring 2 bells? Also any one know exactly what the fault terminals are? I think they can be wired into a zone or something. Link to comment Share on other sites More sharing options...
forrester Posted March 10, 2013 Share Posted March 10, 2013 Yeh that's how it is. It comes with a wire link from a tamper to eng hold off if I can remember. So tamper feed is solely for use for wiring two bells? As it says to link tamper feed to 0v Link to comment Share on other sites More sharing options...
Oxo Posted March 10, 2013 Share Posted March 10, 2013 Fault is a sab battery self test Link to comment Share on other sites More sharing options...
forrester Posted March 10, 2013 Share Posted March 10, 2013 Fault doesn't have to be wired though right? Link to comment Share on other sites More sharing options...
Oxo Posted March 10, 2013 Share Posted March 10, 2013 Well unless its changed, What I knew, Pray educate. Link to comment Share on other sites More sharing options...
forrester Posted March 10, 2013 Share Posted March 10, 2013 The link wasn't a core it was like a metal staple? Yeh it was new. Was a deltabell e Link to comment Share on other sites More sharing options...
forrester Posted March 10, 2013 Share Posted March 10, 2013 Sounds like the tamper any way. If I sort il send a pint up to yourselves Link to comment Share on other sites More sharing options...
Oxo Posted March 10, 2013 Share Posted March 10, 2013 Pot on the pcb if it is a MK7 Not the rotary address one !!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.