HI I JUST MOVED IN AND I GOT THE DEFAULT MAIN CODE BUT I NEED HELP SETTING

FIRST OF ALL EVERYTIME YOU MOVE YOU HEAR A LITTLE CHIME GO OFF EVERY 0 SECONDS OR WHEN THE RED SENSOR SENSES 

SECOND I THINK THE GUY DISABLED THE OUTSIDE SECURITY ALARM FROM SETTINGS BUT CANT REMEMBER HOW CAN ANY ONE DIRECT ME?

ANY IF YOU GUYS KNOW ANY SETTINGS THAT I SHOULD KNOW ENABLE DISABLE ETC PLEASE SHARE

I UPLOADEDA PIC ITS NOT THE SAME BUT LOOKS SIMILAR AND ON KEYPAD THE ALARM LIGHTS ETC ARE ON SIDE

THANKS IN ADVANCE

 

 

 

FIRST OF ALL EVERYTIME YOU MOVE YOU HEAR A LITTLE CHIME GO OFF EVERY 0 SECONDS OR WHEN THE RED SENSOR SENSES 

 

 

You have chime on a zone but we will need to see a picture of your panel to be sure

 

 

 

SECOND I THINK THE GUY DISABLED THE OUTSIDE SECURITY ALARM FROM SETTINGS BUT CANT REMEMBER HOW CAN ANY ONE DIRECT ME?

Again depends on the panel but i doubt it was programmed out. More like disconnected

 

 

 

ANY IF YOU GUYS KNOW ANY SETTINGS THAT I SHOULD KNOW ENABLE DISABLE ETC PLEASE SHARE

Depends on your panel and your needs mate. Not a simple matter of saying enable xyz in all circumstances. It seems you have a basic panel so very few options to enable etc

STOP SHOUTING WE CAN HEAR YOU

hi i took the picture today of the controller and the box maybe you can help more

Why ask twice?

The answer is the same.

 

We do not give out engineering manuals

The switched spur is incorrect.

The internal speaker should not be mounted by the panel.