Jump to content
Security Installer Community

Advice On Sensor Positions


Recommended Posts

  • 2 months later...
  • 3 weeks later...

as to position, imho i feel unwise to advise on basis of the very nice drawing, kitchen cabinets, fans, display cabinets, curtains or blinds fitted as example, do you have petl, perhaps an Amazon Parrot kept in a cage at night? (tropical fish are usually ok - because their cold blooded ;) )

Dual-Tec have both microwave and Pir detection, principle being each detection type is activated by different means. Both have to occur together to trip.

Usually fine in offices or commercial, the rub in domestics is often thin walls, the microwave set to high can penetrate walls, and also rain traveling down a drain or sewer pipe can be picked up, if you then have a partially open window or fan operating, it can cause sudden change of heat at the same time.

So setting up has to be done with care, where as a quad is very much fit, test (of coarse) and forget.

If you think education is difficult, try being stupid!!!!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.