Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,642

  • Joined

  • Last visited

  • Days Won

    287

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    In part yes
  2. james.wilson
    if you program it as final it wont work. if you proram the pir as final triggering it will cause it terminate the setting process and you may still be there or in the hallway. program it as exit and when the galaxy is part set it will make the exit zone an it will becvome an entry zone in part set
  3. james.wilson
    yes https://www.securitywarehouse.co.uk/catalog/knight-g2-surface-contact-with-tact-tamper-and-selectable-res-p-3868.html
  4. james.wilson
    thats not correct there is a bs std now for cable, en does not have a cable std
  5. james.wilson
    its improved on resource demand
  6. james.wilson
    iirc the d75 replaced the yend units
  7. james.wilson
    Has someone recently enabled 4g in your area plus are you running a 433MHz or 868. Not sure if the 500r was available with different freq?
  8. james.wilson
    d75 multi?
  9. james.wilson
    id of thought v1 as the domonial uses the older protocol that the galaxy now uses
  10. james.wilson
    the reason for tapping the contact on the door is as reeds age they can stick in closed position. Shows you have a failing door contact.
  11. james.wilson
    Is it alarming on all ​devices, ie pa 1,2,3 and 4. Plus you say etc, are there more things displayed? If its alarming on everything then id be suspecting the panel is at fault. If it was just one device then id be looking at that device​ ​
  12. james.wilson
    spend your money on other things then wish you had spent it on security after you got done
  13. james.wilson
    qfa
  14. james.wilson
    id disagree you run any cable close then voltage will be induced, screening it will dump that induced voltage to earth before it can induce into the cores. Twisted pair using a balanced signal allows for induced noise to be mitigated and in effect ignored, does not mean it isnt there. Agree on working voltage but not sure if 7kv would be ok on t&e ie 2kv ac will arc at about 1.5mm in air
  15. james.wilson
    they are double insulated but is for mechanical protection not for em protection, need screened or swa etc for that. Plus the insulation on alarm cable is rated for selv not lv
  16. james.wilson
    clam using unofficial plugins
  17. james.wilson
    1, yes it has 8 hard wired circuits 2, dont know dont know it well 3, ideally you need to keep at least 6" away from power cable, this is mainly for safety as alarm cable is rated at 50v not 600v 4, for diy id recommend the texecom as they will support you, some equipement is limited to professionals only so you cant buy it anyway 5, yes
  18. james.wilson
    Ish, I'd prefer something other than clam for the Av side. It's ok but needs a lot of tweaking. But as its free I can't moan. I find the unofficial clam lists more use to be honest
  19. james.wilson
    a firewall wont. Id need to setup danguardian for that which is what i use at work. But can block some usefull stuff too. I use whitelists for websites to allow downloads etc
  20. james.wilson
    C6 the mods have my full support id suggest you accept the advice
  21. james.wilson
    technical advise and comment is fine. I wont have a little game going on. All should stick to posting comment and opinion not little battles. I welcome all. I also wont get involved in your legal type comments. Look its a forum, people make comments, make their view and maybe have a bit of banter along the way. Maybe a line drawn and we all continue as we all want?
  22. james.wilson
    yet c6 you say you want to listen to advice from others that know? sorry i know thats answering a question with one
  23. james.wilson
    Charlie not in other threads, if you want to discuss it keep it to one thread. Its not optional
  24. james.wilson
    Get trade status and look at the siemens manual. Its the most flexible power intruder panel ive ever seen
  25. james.wilson
    you didnt
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept